编辑器版本
×
标准版
1、简单易用，可快速上手
2、流畅支持300个器件或1000个焊盘以下的设计规模
3、支持简单的电路仿真
4、面向学生、老师、创客
专业版
1、全新的交互和界面
2、流畅支持超过3w器件或10w焊盘的设计规模，支持面板和外壳设计
3、更严谨的设计约束，更规范的流程
4、面向企业、更专业的用户
标准版 Relay Model For Livolo
简介：This circuit is a touch switch that replaces the wall switches
开源协议: Public Domain
描述
##### **This circuit is a touch switch that replaces the wall switches and allows you to control the lighting (on and off), uses two PCBs, the first one is black and includes the microcontroller, antenna, etc., the second PCB is **[black](https://oshwhub.com/Oleg533/wireless-touch-switch-model-for-livolo-crystals)** and includes the AC part,**
##### **power supply, relays, etc.**
# **Features:**
##### **ATmega328P 3.3V 8Mhz microcontroller, with pads for external oscillator (optional)** ##### **Antenna NRF24L01 SMD** ##### **Touch push button TTP223 + HTTM light reflector to interact with the switch manually.** ##### **RGB LED (The color blue does not have PWM) to indicate the status of the relays or RF connection.** ##### **Flash chip for PHOTO** ##### **Chip ATSHA204A for signature.** ##### **JST-8-1MM AVRISP + UART programming connector (UART requires 100nF capacitor in the cable)** ##### **2 relays of HF46F-5-HS1 of 5A to control AC load** ##### **DS18B20 sensor near the power supply to control the internal temperature.** ##### **Power supply HILINK HLK-PM01 5V** ##### **Voltage regulator AMS1117-3.3** # **Requirements:** ##### **It is necessary to connect the Neutral cable to the power supply.** ##### **It is necessary to print two pieces of plastic with a 3D printer to house the circuits, hold the glass and be able to screw the switch to the wall.** **** **** **** **** **** ****
##### **ATmega328P 3.3V 8Mhz microcontroller, with pads for external oscillator (optional)** ##### **Antenna NRF24L01 SMD** ##### **Touch push button TTP223 + HTTM light reflector to interact with the switch manually.** ##### **RGB LED (The color blue does not have PWM) to indicate the status of the relays or RF connection.** ##### **Flash chip for PHOTO** ##### **Chip ATSHA204A for signature.** ##### **JST-8-1MM AVRISP + UART programming connector (UART requires 100nF capacitor in the cable)** ##### **2 relays of HF46F-5-HS1 of 5A to control AC load** ##### **DS18B20 sensor near the power supply to control the internal temperature.** ##### **Power supply HILINK HLK-PM01 5V** ##### **Voltage regulator AMS1117-3.3** # **Requirements:** ##### **It is necessary to connect the Neutral cable to the power supply.** ##### **It is necessary to print two pieces of plastic with a 3D printer to house the circuits, hold the glass and be able to screw the switch to the wall.** **** **** **** **** **** ****
设计图
| ID | Name | Designator | Quantity |
|---|---|---|---|
| 1 | HILINK_HLK-PM01_5V | U$1 | 1 |
| 2 | TERMINAL_5MM_2P | J2,J1 | 2 |
| 3 | DS18B20 | U3 | 1 |
| 4 | 1K | R4,R2 | 2 |
| 5 | 10K | R5,R1,R2 | 3 |
| 6 | MMBT2222 | Q2,Q1,Q3 | 3 |
| 7 | 22uF | C1,C2 | 2 |
| 8 | 2X4_SMD_2MM | J3 | 1 |
| 9 | PWD | L1 | 1 |
| 10 | 2K | R10 | 1 |
| 11 | 4.7K | R11 | 1 |
| 12 | M7 | D2,D1 | 2 |
| 13 | HF46F-5-HS1 | RLA1,RLA2 | 2 |
| 14 | NC | U$8 | 1 |
| 15 | V_REG_LM1117SOT223 | AMS1117-3 | 1 |
| 16 | 4.7uF | C1 | 1 |
| 17 | GND | GND5,GND6,GND11,GND2,GND4 | 5 |
| 18 | ATSHA204A | U2 | 1 |
| 19 | 100nF | C7,C9,C3,C2 | 4 |
| 20 | TTP223 | TTP1 | 1 |
| 21 | 0-50pF | C8 | 1 |
| 22 | 100uF | C4 | 1 |
| 23 | 10uF | C5 | 1 |
| 24 | ATMEGA328P | U1 | 1 |
| 25 | 8MHz | Y1 | 1 |
| 26 | LED_RGB | L1 | 1 |
| 27 | 68R | R1 | 1 |
| 28 | NRF24L01 | U$8 | 1 |
| 29 | SPI_FLASH-W25X40CLSNIG | FLASH | 1 |
| 30 | 10k | R10 | 1 |
| 31 | AVRISP+UART | JST1 | 1 |
| 32 | 2X4_SMD_2.0MM | J3 | 1 |
| 33 | HTTM_SENSEPAD | U$1 | 1 |
| 34 | 10R | R3,R4 | 2 |
| 35 | 1K | RR1 | 1 |
| 36 | 10K | RR2 | 1 |
展开
工程成员
0
0
收藏到专辑
侵权投诉
相关工程
换一批
加载中...
添加到专辑
×
加载中...
温馨提示
×
是否需要添加此工程到专辑？
温馨提示
动态内容涉嫌违规
内容：
